|
Rotary Power has over 30 years experience in the design and development of high quality Hydraulic Axial Piston Pumps & Motors.
We would like to offer their following products:
A RANGE AXIAL PISTON PUMPS & MOTORS
Unique construction allows operation on a wide range of fluids. i.e. Hydraulic Mineral Oils, Water Emulsions, Water Glycols, Phosphete Ester, Diesel and other special fluids.
Wide range of controls as standard, with many special variants possible to suit specialized applications.
- Fast and accurate control response.
- Compact overall dimensions with good power to weight ratio.
- Designed and developed to give long operating life.
- Reliability proven over 25 years in the most demanding of conditions
|
|
|
C RANGE METERING PUMPS
Designed specifically for the Polyurethane foam industry from over 20 years application experience and development.
Uniform fluid temperatures throughout the pump.
Designed for high inlet pressure. Twin PTFE seals
running on a ceramic bush allow up to 20 bar.
High metering accuracy. Matched and balanced control components minimise backlash errors.
- No leakage return line, pump is internally drained.
- Leakage indicator and lubrication ports included
- All major components treated to minimise corrosion.
- Cartridge shaft seal to ease service and minimise maintenance time.
|
|
|
XL COMPACT PISTON MULTI-CAM MOTORS
- Modular Concept Common torque unit with 4 standard output options. Over 20 optional output options
- True freewheel possible, recirculating freewheel possible
High-Torque Start, efficient piston roller design
Pintle valving reduces mechanical losses
Total Reversibility
Equal torque in both directions
Compact Installation
Multi-stroking radial piston design
Minimum overall dimensions
High power-to-weight ratio
High Pressure Capability
Designed to operate at up to 420
bar peak pressure
Low Inertia
Higher capacity lower speed drives
|
 |
|
SMA MOTOR
High Pressure Capability. Most SMA motors are designed for continuous 350 bar & intermittent 490 bar duty.Will withstand higher peak pressures
High Power Capability. Designed for continuous high power use.
High Speed Range. Designed to operate over a wide
speed range Up to 150:1 for standard models. Up to 250:1 for some special models.
High Efficiencies -Minimal no load pressure drop even at high speed.
Efficient design based on hydrostatic & taper roller bearings.
Hardened high tensile steel crankshaft supported in large taper roller bearings.
|
 |
|
