0%

Cameron’s ORBIT®


valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve systems in switching service.

To Close an ORBIT valve

To close an ORBIT valve, as the handwheel is turned, the stem begins to lower.
Precision spiral grooves in the stem act against fixed guide pins, causing the stem and core to rotate
Continued turning of the handwheel rotates the core and stem a full 90 degrees without the core touching the seat
Final turns of the handwheel mechanically wedge the stem down, pressing the core firmly against the seat.

ORBIT valves are ideal where frequent cycling and a positive shutoff
are required, conditions that are prevalent in molecular sieve
applications in gas processing plants.

Market Operation

ORBIT valves are ideally suited for:
• Mol sieve dehydration
switches valves
• Flowlines
• Meter isolation
• Dryer switching
• Block and bypass
• Product segregation
• Emergency shutdown
• Suction and discharge isolation
• Heat transfer fluids/hot oil
• Hydrogen service
• Many additional applications

 

Cameron Orbit Valve Preferred Choice in Refinery, Ammonia Plants, Gas Processing Plants and used by most Oil and Gas Companies.

Unique tilt-and-turn design for fast, low torque operation and long term, reliable performance in applications, when zero leakage and frequent operations are demanded.

Application of Orbit Valve

  • Mol Sieve Dehydration Switches Valves.
  • Ammonia Service
  • Hydrogen Service
  • Dryer Switching Valves
  • Emergency Shutdown and Isolation Valves.

Advantages of Orbit Valve

  • No Rubbing between the sealing surface.
  • Injectable Packing.
  • Single Seat Design.
  • Long Life Reduces Plant Outage.
  • Top Entry Design
  • No rubbing surfaces
  • Injectable packing
  • Single seat design
  • Long life reduces plant outage
  • Top entry design
  • Low Maintenance
  • Self Cleaning
  • Mechanical Cam Closure

Sizes

  • 1″ to 24″, Full and Reduced Port
  • Ends
  • Flangged / Butt / Socket Weld
  • Pressure Class
  • ASME Class 150 to 2500

Sizes

1″ to 24″, Full and Reduced Port.

Ends

  • Flangged / Butt / Socket Weld.
  • Pressure Class
  • ASME Class 150 to 2500.

Specification & Compliance

  • API 6D
  • ISO 9001:2008
  • ASME B16.34
  • Shell GSI SPE 77/300 TAT Qualified
  • and TAMAP Two-Star Rating.
  • 36 Months Warranty
  • Little Rock, Ark., USA.
  • Seat and Ball
cameron orbit valve