Douglas Chero Valve

DOUGLAS CHERO™ forged steel valves are ideal for standard and critical industrial applications. The welded bonnet joint eliminates the body/bonnet flanges, reducing weight and simplifying the application of exterior insulation

Threaded, Socket-Weld and Butt-Weld End Gate Valves

DOUGLAS CHERO gate valves are ideal for bi-directional and tight shutoff. Due to the flow characteristics of the wedge-to-seat design,
gate valves should be operated in the full-open or full-closed position. Gate valves are utilized inapplications where minimum pressure drop isdesired.

Sizes: 1/4” to 3” (6 mm to 80 mm)
Classes: 800 to 4500

Flanged End Gate Valves

DOUGLAS CHERO flanged end gate valves are ideal for bi-directional flow. They are ideal for on/off duties where tight shutoff is required. All of our designs feature integral body forging.
Cameron offers flanged gate valves for a wide range of service conditions.

Sizes: 1/2” to 2” (15 mm to 50 mm)
Classes: 150 to 2500

 

Extended Body Gate Valves

These valves are available in a variety of connections. Extended body valves have a welded or threaded connection and are used for pressure vessels and header lines for vents drain, or take-off lines and instrumentation.

Sizes: 1/2” to 2” (15 mm to 50 mm)
Classes: 800 to 1500

Threaded, SocketWeld and Butt-Weld End Globe Valves

Globe valves are ideal for unidirectional, controlled flow. The flow characteristic of a globe valve is repeatable, consistent, and easy to control at various open positions.

Sizes: 1/4” to 2” (6 mm to 50 mm)
Classes: 800 to 4500

Flanged End Globe Valves

Flanged end globe valves offer flow characteristics that are repeatable, consistent and easy to control at various open positions. This makes them ideal for unidirectional, controlled flow and suitable for throttling applications.

Sizes: 1/2” to 2” (15 mm to 50 mm)
Classes: 150 to 2500

Threaded, Socket-Weld and Butt-Weld End Swing and Lift Check Valves

Swing and lift check valves are available for a variety of services and are commonly used for high-pressure applications. Quality manufacturing helps ensure that the valve will prevent flow reversal. Cameron offers swing, piston, and ball configurations for these valves.

Sizes: 1/4” to 2” (6 mm to 50 mm)
Classes: 800 to 4500

Flanged End Swing and Lift Check Valves

DOUGLAS CHERO flanged end swing and lift check valves are designed for use in multiple applications. These valves are ideal for applications where flow characteristics of
fluids require pressure control.

Sizes: 1/2” to 2” (15 mm to 50 mm)
Classes: 150 to 1500

Threaded, Socket-Weld and Butt-Weld Y-Pattern Globe Valves

Y-pattern globe valves are designed much the same as angle
globe valves. They are designed for a variety of service
conditions and are commonly used for high pressure
applications

Sizes: 1/2” to 2” (15 mm to 50 mm)
Classes: 800 to 4500