DESSER ROTARY GAS METERS
Dresser Series B Meters are designed to provide continuous, accurate gas measurement in the gas distribution, gas transmission and gas production segments, as well as industrial in-plant applications. These meters are suitable for handling most types of clean, dry, common gasses at constant and varying flow rates. This includes Green-initiative friendly, 40% hydrogen blended natural gas Contact the factory for guidance on non-typical applications.
For over a century, Dresser meters have been used for billing of commercial and industrial gas loads. Accuracy, dependability, and low maintenance are of key importance in custody transfer measurement applications. The time-proven Dresser meter is the preferred rotary positive displacement gas meter in distribution, transmission and production segments for accurate measurement of gas from the well to the burner. To meet the evolving needs of our customers, our product line has expanded to include a large variety of control and measurement equipment.
dRESSER industrial/Commercial Gas meters
Series B3 8C/11C/15C Gas Meters
Dresser Measurement offers a competitive range of rotary meters for commercial and industrial metering applications, allowing for the selection of the correct meter size for cost effectiveness and accurate measurement.
8C/11C/15C size meters have a 6-3/4″ Flange to Flange dimension and 2″ ANSI 150 Flanged Connections for standardization in the meter set design. As loads change, meter sizes are easily interchanged, saving the cost of re-piping. Metric sizes are also available. Dresser Industrial Commerical Gas Meters
Series B3 2M/3M/5M gas Meters
5M175 size meters have a 6-3/4″ Flange to Flange dimension and 3″ ANSI 150 Flanged Connections in the meter set design.
Models 8C through 5M are available with a 200 PSIG (13,8 Bar) rating upon request
Models 8C through 2M are available with a 1-1/2” nippled connections upon request
Series B3 7M/11M/16M gas Meters
7M175 size meters have a 9-1/2″ Flange to Flange dimension and 3″ ANSI 150 Flanged Connections in the meter set design.
11M/16M175 size meters have a 9-1/2″ Flange to Flange dimension and 4″ ANSI 150 Flanged Connections in the meter set design.
Operating temperature range from -40°F to +140°F (-40°C to +60°C)
Series B3 23M/36M/56M Gas Meters
23M232 size meters have a 9-1/2″ Flange to Flange dimension and 4″ ANSI 150 Flanged Connections in the meter set design.
23M175 size meters have a 16″ Flange to Flange dimension and 6″ ANSI 150 Flanged Connections in the meter set design.
38M175 size meters have a 18″ Flange to Flange dimension and 6″ ANSI 150 Flanged Connections in the meter set design.
56M175 size meters have a 21″ Flange to Flange dimension and 8″ ANSI 150 Flanged Connections in the meter set design.
Electronic Temperature Compensating Accessories
Dresser Micro Corrector – IMCW2 (PTZ and T-Only)
The field proven Dresser Micro Corrector IMCW2 offers accurate volume correction integrally mounted to your rotary meter. This complete solution offers the reliability and accuracy you have grown to expect from Dresser products packaged in a complete, plug-and-play solution. The IMCW2 is available for live correction in various configurations including as Pressure, Temperature and Super-compressibility (IMCW2-PTZ), Temperature Only (IMC-T) and Pressure Only (IMC-P) models.
Improved low flow accuracy, intuitive user interface, and enhanced logging capabilities simplify and optimize gas measurement activities. The Smartprove interface reduces accuracy test time by up to 90%!
Compatible with Dresser Series A (LMMA), Series B, and Romet meters, the IMCW2 model is an integral corrector rated for Division 1 hazardous locations by the Canadian Standards Association (CSA) and ATEX.
This second-generation Micro Corrector (MC2) takes the proven MC platform and adds features to enhance the user experience. The MC2 can deliver data logging and increase operations and maintenance efficiencies.
The Model MC2 197, functions as a wall mount corrector. As a wall mount model, the corrector also performs as an economical pressure and/or temperature recorder.
The MC2 is rated for Division I hazardous locations by Canadian Standard Association (CSA).
- Up to three data logs provide years of historical information and are configurable in increments from one minute to one month
- Audit log maintains a record of configuration and calibration changes
- Available with your choice of lithium or alkaline sealed battery pack
- Alarm and fault activity are displayed in the data log and audit log reports
- E2PROM provides non-volatile storage of recorded data and corrector configuration, regardless of battery condition
DP Micro Corrector IMCW2 PTZ-DP
The only patented solution for meter health monitoring, the Dresser Differential Pressure (DP) Micro Corrector is an integrated solution which provides the gateway for reduced operational expenses and lower carbon emissions.
The Differential Pressure (DP) Micro Corrector uses continuous monitoring of the differential pressure drop across the meter to monitor your meter’s health, alerting you to conditions which may affect meter accuracy, and by default, lost revenue.
Revolutionizing Traditional Operations
Monitoring a meter’s differential pressure revolutionizes traditional operations and maintenance practices. Instead of regularly scheduled meter site visits, companies can monitor the meter’s health and perform maintenance only as required. Companies can also benefit from the additional peace of mind that expected operations continue well after the technician has left the site.
Dresser Gas meters ETC Index Delivers Accurate Temperature Compensation
The Dresser Electronic Temperature Compensator (ETC) is a direct replacement alternative for the existing Dresser mechanical Temperature Compensating (TC) indexes on Dresser Series B and Series A (LM-MA) meters.
The simple, easy to read ETC index provides accurate and reliable temperature and fixed factor pressure compensation. Dresser Natural Gas Solutions offers factory installation of the index, optional customization and configuration as well as installation of Automated Meter Reading (AMR) endpoints. The ETC is powered by a lithium battery with an average battery life of 20 years, and stores 150 days of hourly measurement data safely in the on-board non-volatile memory.
Dresser gas Meters ES3 Electronic TC Indexes with Mechanical Backup
Accuracy and reliability are key requirements when selecting a temperature compensating (TC) index. The ES3 product line from Dresser Natural Gas Solutions provides the accuracy and reliability you have come to trust from Dresser rotary meters, plus the added security of the established Dresser Series 3 non-compensated mechanical index. The Dresser ES3 is designed for the current temperature compensated Series B meter family.
Product Features and Benefits
- Non-compensated mechanical index
- Reduced TC proving time (up to 97%) on Model 5 Prover with simple, single cable ES3
- Non-volatile memory retains the last 150 days of time stamped logged data
- Factory installed index on both new and refurbished Dresser meters
- Factory configured indexes for immediate on-site installation
- Compatible with commercially available AMR devices
- Simple field replacement of existing Dresser meter indexes
- Single point temperature recalibration
- Configurable fixed pressure factor
- Tamper-resistant magnetic scrolling of LCD display
- 20 user selectable, scrollable display screens
- Non-compensated counter masked to customer requirements
- Battery life displayable in both months and voltage
gas meters Mechanical Indexes
Temperature Compensated (TC, TD, SSP)
Accessory Unit for Dresser Series B3 Meters
A mechanical computer and a spiral bi-metallic thermocouple (probe) in a sealed temperature well at the meter inlet perform temperature compensation on meter sizes 8C-16M. Series 3 TC Units give remedied gas volume readings to a 60˚F (15˚C) base temperature for readout in Standard Cubic Feet (SCF) or Typical meters cubed (Nm3) between streaming temperatures of – 20˚F and +120˚F (- 29˚C and + 49˚C).
Dresser B3 Gas Meters with Solid State Pulser
The Dresser B3 Meter with Solid State Pulser produces low recurrence beats which address volumetric data essential for distant information assortment units. Mechanical switches are eliminated and high reliability is supported by solid state construction. There is no need for a battery and no maintenance.
With the dual connector option, you can use one connector for your AMR system and another for your customer. These pulsers are accessible for our Series B3 (Life-Lubed™) meters and Series A1 (LM-Mama) meters.
Gas Meters Oil
Supported for use in every single Dresser meter. The oil comes in sizes ranging from 4 ounces to 55 gallons.
Dresser D800/D1000 Gas Meters
Superior metering precision
The Dresser D800/D1000 Gas Meters set a new standard for rotary meter performance by building on Dresser’s long-term accuracy. Both the D800 and D1000 guarantee a sustained, non-adjustable measurement accuracy from pilot loads up to 1700 ACFH with an exceptional average start rate of only 0.30 ACFH (stop rate of 0.15 ACFH) and a rapid ramp up to +/- 1% accuracy at only 8 ACFH.
Rotary Displacement Gas Meters- g series
• Meter sizes Range of from G16 through G1000
• High Pressure meter sizes from G16 through G100
• Permanent Metrological repeatability
• Accuracy independent of gas specific gravity, line pressure, or fluctuating flow
• Flange Classes ANSI #150 FF 2” to 8” or PN 16 FF in pipe sizes DN40 to DN200
• Temperature range: -40°C to +70°C
• Permanently lubricated, maintenance free gear reduction Accessory Units
• Euro Counter: 355° rotateable index with LF Pulser,
Optional HF pulser available upon request
• Series 3 – numerous types available
• MID Certified
GAS ROTARY METERS PRICES IN pAKISTAN
Marketing International Services (Pvt) Ltd is the local representative of Dresser Gas Meter in Pakistan. Your can get the qoutation from their Head office based in Karachi. The Prices we offer on in local currency (FOR) Free on Board (FOB) and DDP basis.
HOW TO BUY GAS METERS
Dresser Utility is the largest supplier of Industrial and Commerical Rotary Gas Meters In Pakistan. You can buy these meter through their local representative in Pakistan. You may send the following information on
gAS METERS SELECTION
Capacity ratings from 2000 CFH to 56,000 CFH (22,6 m3/h to 1,585 m3/h)
• Maximum operating pressure rating of 175 psig (12 Bar)
• Models 2M through 5M are available with a 200 PSIG (13,8 Bar) rating upon request
• Operating temperature range from -40°F to +140°F (-40°C to +60°C)
INFO REQUIRED FROM THE BUYER
- Maximum flow
- Minimum Pressure
- Line connection size
gas Meters installation
Dresser meters can be installed in either a Top Inlet (vertical gas flow) or a Side Inlet (horizontal gas flow) configuration. The preferred installation is top inlet in a vertical pipeline with gas flowingdownward. Although the design of the impellers tends to make the meter self-cleaning, top inlet mounting enhances the ability to pass dirt, pipe scale, or other debris through the meter. Piping should be rigid and properly aligned. The meter does not require any direct means of support. However, the piping might need support to eliminate any piping strains which may cause the meter to bind.
Another recommendation is to install the meter with a bypass adjacent to the main line. Additionally, the installation of tees upstream and downstream\ of the meter will help facilitate transfer proving or other types of testing with the meter still mounted in the pipeline.
Do not install the meter lower than the discharge pipe run to avoid accumulation of condensate or foreign materials in the metering chamber. Use a Gasket style, Y-type, or some other kind of strainer upstream of the meter to help remove foreign matter (pipe sealant, tape, weld slag, etc.) from the gas stream. A 100 Mesh screen is recommended for any strainer used.
The installation of a lubricated gas valve directly before a meter is not recommended, as excess valve lubricant may stop impeller rotation.
If over-speed conditions could occur, a restricting flow orifice plate should be installed 2 to 4 pipe diameters downstream of the meter outlet. Please Contact Dresser NGS representative MISL for sizing, pricing and availability.
Pakistan has the biggest net work of Petroleum gas Pipeline. Pipeline extending from the port city of Karachi to the city of Kasur in Punjab, Pakistan. It is a 1,100 km long task which is shrunk by the Pakistani government to be worked by Russia
The transmission network of SSGC includes over 4,143 kilometers of high-pressure pipeline with diameters ranging from 12 inches to 42 inches.Through a 48,254-kilometer distribution network, about 3.21 million industrial, commercial, and residential customers received approximately 343,664 million cubic feet per day (MMCFD) of gas in FY 2020-21. Under license from M/s, SSGC operates its own meter manufacturing plant (MMP), the only one of its kind in South East Asia. Itron, France. The plant produces G-4 and G-1.6 meters for local use and some for export to foreign buyers. During FY 2020-21, MMP created 222,390 G-1.6 and 230,624 G-4 gas meters. SSGC operates 24 Customer Facilitation Centers (CFCs) in Sindh and Balochistan to answer customers’ gas-related questions and provides first-rate customer service through a well-balanced combination of technology and human interaction.
From Sui in Baluchistan to Peshawar in Khyber Pakhtunkhwa, the SNGPL Pipelines expand, adding more than 9,131 kilometers of transmission system. The pipeline in the distribution system spans 142,998 kilometers. SNGPL serves commercial, domestic, general industry, fertilizer power, and cement sectors with over 7.22 million customers. Between July 2019 and June 2020, consumers received 623,724 MMCF in gas sales annually.