Gas Control Valves

GAS CONTROL VALVES

Becker Precision Equipment has been providing high quality products to the natural gas industry since 1955. Becker's valve regulators, actuators, and pneumatic controls have earned their reputation for excellent control and reliablility.

Becker actuators can be supplied with standard or custom design control systems to meet the customer's specific requirements. These actuators can be installed in the field or factory assembled and tested on the valve of your choice.

  • FULL PORT CONTROL VALVE
  • QUIET TRIM CONTROL VALVE
  • LOW PRESSURE CONTROL VALVE
  • SURGE CONTROL VALVE
  • GLOBE PATTERN CONTROL VALVE
  • ROTARY DOUBLE ACTING ACTUATOR
  • ROTARY PISTON SPRING RETURN 

 

FULL PORT CONTROL VALVE

The Becker FPCV-T0 Full Port Control Valve is a trunnion-mounted rotary control valve designed for monitoring or mild-duty service above ground and heavy duty service below grade.

The FPCV-T0 features a rugged design that provides maximum capacity with minimal full-open pressure drop. The FPCV-T0 features a side-entry, forged body and end closures that allows easy maintenance or repair of the control valve.

The FPCV-T0 is ideal for use as a monitor over-pressure regulator or other mild-duty service. The FPCV-T0 is available in a variety of configurations from 2” (50 mm) bore to 42” bore (1050 mm). 


QUIET TRIM CONTROL VALVE

The Becker QTCV-T1 Quiet Trim Control Valve is a trunnion-mounted rotary control valve designed for general control valve service.

The QTCV-T1 features a rugged design that provides moderate noise attenuating capabilities with extended an turndown ratio. The QTCV-T1 features a side-entry, forged body and end closures that allows easy maintenance or repair of the control valve.

The QTCV-T1 is ideal for use as a flow control valve or pressure control valve where predicted noise does not pose a problem. The QTCV-T1 is available in a variety of configurations from 4" (100 mm) bore to 36" bore (900 mm).

LOW PRESSURE CONTROL VALVE

The Becker ParamaxTM Control Ball Valve is a segmented type rotary control valve designed for light duty natural gas regulation.

The ParamaxTM features a high capacity, cost effective design in a very compact package. The ParamaxTM incorporates a RF Flanged design in both 150 ANSI and 300 ANSI pressure ratings. Available sizes range from 2” (50mm) to 12” (300mm).

ParamaxTM control valves typically utilize Model 33 Spring Diaphragm Actuators (Rotary). When paired with Becker environmentally friendly control instrumentation, the ParamaxTM is the ideal high capacity valve for light duty / low pressure throttling applications in Natural Gas Pipeline  

SURGE CONTROL VALVE

The surge control valve is the most important valve in the centrifugal compressor system.

The surge control valve must provide accurate control, wide flow rangeablility, and fast action. Most importantly, the valve must be rugged and reliable!

Since the surge control valve is so essential to the protection of the centrifugal compressor, we commit ourselves to engineering and manufacturing the highest quality surge control valve availalbe. 

 
Globe Pattern Control Valve

 The Becker Series CVE & 41005 Globe Valve Regulator’s innovative design makes it among the most versatile natural gas contral valves in the world. Its cage-guided design utilizes multi-interchangeable trim styles, eliminating the need to change body styles.

The Becker Globe valve is available with balanced or un-balanced trim for natural gas regulating applications such as pressure and flow control. Body styles provide a choice of flanged, buttweld, or threaded valve end connections. 

ROTARY DOUBLE ACTING ACTUATOR

 The RPDA Rotary Piston Double Acting Actuator is designed for heavy duty control applications that require optimum performance.

The RPDA is typically utilized when applications require a "lock last" failure mode. The RPDA incorporates a “crank-arm” mechanism specifically designed for the rigors of throttling control valve applications.

The RPDA can accept high pressure power supply gas up to 500 psig (3447 kPa) enabling the use of smaller actuators or Becker’s exclusive Bleed to Pressure System (BPS) feature. 


ROTARY PISTON SPRING RETURN

The RPSR Rotary Piston Spring Return Actuator is designed for heavy duty control applications the require optimum performance.

The RPSR is typically utilized when applications require the control valve to “fail open” or “fail closed” upon loss of power supply gas.

The RPSR incorporates a “crank-arm” mechanism specifically designed for the rigors of throttling control valve applications.

The RPSR can accept high pressure power supply gas up to 500 psig (3447 kPa) enabling the use of smaller actuators or Becker’s exclusive Bleed to Pressure System (BPS) feature. 

 

 

 

 

 

 

 

 

   
   

 

Control Ball Valve Class VI

Control Ball Valves Class VI are the best application for gas Control. T1 Ball Valve comes with Class VI Tightness.

 

Control Ball Valve Class V

Class V are ideal for use as a flow control valve or pressure control valve where predicted noise does not pose a problem

 

Control Ball Valve Class IV

Where noise may be a problem, Control Ball Valve Class IV are ideal for use as a pressure control valve. These Valves are available in variety

 

Becker Silencer Noise Attenuation  for Control Ball Valves

The CVS Control Valve Silencer is a noise attenuating device that is installed immediately downstream of any control valve regulator to provide noise reduction