0%

Universal 3 Series
Company: SPX Flow Technology
Brand: Waukesha Cherry Burrell
Up to 500 psi (34.5 bar) pressure capability.
Pumps rated to 300°F (149°C) as standard.
Special rotor nut designed for extended service without loosening.
No bearings in the product zone.
New shafts are shorter and have larger diameter 17-4 PH shafts:

 

Universal Twin Screw Series
Company: SPX Flow Technology
Brand: Waukesha Cherry Burrell
Screws made from Waukesha Alloy 88 non-galling material allow the pump to run through incidental contact and reduce risk of pump damage if screws make contact
Pumps large particulates without degradation
Front loaded access to product side seals
Reduces slip pulse in low inlet pressure, low viscosity, and high pressure conditions
Operating principle virtually eliminates pressure fluctuations

Universal 1 Seriese
Company: SPX Flow Technology
Easy cleaning and disassembly
Flexible, three-way mounting
Field interchangeable single and double “O” ring and mechanical seals
Non-galling Waukesha “88” alloy rotors
3-A approved
Maximum pressure: 200 psi (13.8 bar)
Temperature range: -40°F (-40°C) to 300°F (149°C)

Universal 2 Series
Company: SPX Flow Technology
Brand: Waukesha Cherry Burrell
Bi-directional flow
Large diameter shafts for greater strength & stiffness
Rotor/shaft connection sealed from the product zone
Extended-life outer seal
Mechanical seals standard
316 pump body standard; 316L pump body optional
Heavy-duty bearing frame; stainless steel bearing frame optional
Maximum pressure: 200-500 psi (13.8-34.5 bar), depending on model
Temperature range: -40° F (-40° C) to 300° F (149° C)

Universal Lobe Series
Company: SPX Flow Technology
Brand: Waukesha Cherry Burrell
Free draining cover in horizontal or vertical port position
Rotor/shaft connection sealed from product zone
Non-galling Waukesha “88” alloy rotors
Mechanical seals standard; single or flushed double seals optional
Optional steam-in-place and seal flush
316 stainless steel pump body and cover; 316L pump body optional
Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
Temperature range: -40° F (-40° C) to 300° F (149° C)

Resilient Seated Butterfly Valve
Company: SPX Flow Technology
Brand: Waukesha Cherry Burrell
A modification of the Universal 2 positive displacement pump, this pump is manufactured specifically for paint re-circulation in the automotive industry.
Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
Temperature ranges: -40°F (-40°C) to 300°F (149°C)