Valves Standard

VALVES STANDARD

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME):

B16.10 Face-to-Face and End-to-End Dimensions fo Valves
B16.34 Valves-Flanged, Threaded, and Welding Ends
Boiler and Pressure Vessel Code:
Section I – Power Boilers
Section IV- Heating Boilers
Section VII, Division 1 – Pressure Vessels

AMERICAN PETROLEUM INSTITUTE (API):

526 Flanged Steel Safety Relief Valves
594 Wafer and Wafer-Lug Check Valves
598 Valve Inspection and Test
599 Steel ans Ductile Iron Plug Valves
600 Steel Gate Valves, Flanged or Butt Welding Ends
602 Compact Steel Gate Valves-Flanged, Threaded, Welding, and Extended Body Ends
603 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
604 Ductile Iron Gate Valves-Flanged Ends
607 Fire Test for Soft-Seated Quarter-Turn Valves
608 Metal Ball Valves Flanged and Butt-Welding Ends
609 Butterfly Valves, Lug-Type and Wafer-Type
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY (MSS):

SP-25 Standard Marking System for Valves, Fittings, Flanges, and Unions
SP-42 Class 150 Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends
SP-45 Bypass and Drain Conections
SP-61 Pressure Testing of Steel Valves
SP-76 Butterfly Valves
SP-68 High Pressure Offset Seat Butterfly Valves
SP-70 Cast Iron Gate Valves, Flanged and Threaded Ends
SP-71 Cast Iron Swing Check Valves, Flanged and Threaded Ends
SP-72 Ball Valves with Flanged or Butt-Welding Ends for General Service
SP-78 Cast Iron Plug Valves, Flanged and Threaded Ends
SP-80 Bronze Gate, Globe, Angle, and Check Valves
SP-81 Stainless Steel, Bonnetless, Flanged, Knife Gate Valves
SP-82 Valve Pressure Testing Methods
SP-84 Valves- Socket Welding and Threaded Ends
SP-85 Cast Iron Globe and Angle Valves, Flanged and Threaded Ends
SP-88 Diaphragm Type Valves
SP-91 Guidelines for Mnaual Operation of Valves
SP-92 MSS Valve User Guide
SP-99 Instrument Valves
SP-101 Part-Turn Valve Actuator Attachment
SP-102 Multi-Turn Valve Actuator Attachment
SP-110 Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flanged Ends
NATIONAL ASSOCIATION FO CORROSION ENGINEERS (NACE):

Mng Resistant Metallic Materials for Oil Field EquipmentR-01-75 Sulfide Stress Cracki
The standards marked with a square are also American National Standards Institude (ANSI) standards