Waukesha Cherry-Burrell Pumps

Waukesha Cherry-Burrell, an SPX FLOW brand, is a major supplier of component equipment including Waukesha pumps, Waukesha valves, Waukesha fittings, Waukesha heat exchangers, and Waukesha dispersion equipment. Within Europe, Waukesha Cherry-Burrell has a history with AxFlow that goes back more than 50 years, making us the pre-eminent European experts in their products.

Positive Displacement Pump

Universal 3 Series - Positive Displacement Pumps

Universal 3 Series positive displacement pumps are engineered to perform in food & beverage, dairy, pharmaceutical, personal care, chemical and industrial industries. 

Long-life Features

  • Up to 500 psi (34.5 bar) pressure capability
  • Pumps rated to 300°F (149°C) as standard
  • Special rotor nut designed for extended service without loosening
  • No bearings in the product zone
  • New shafts are shorter and have larger diameter 17-4 PH shafts:
    • Reduces overhung load which improves shaft alignment and decreases seal and bearing wear for extended seal life.
    • Improves shaft strength and stiffness helping to eliminate vibration
  • Heavy duty stainless steel bearing frame standard
  • Double tapered roller bearings
  • Greased lubed bearings for positive lubrication to all bearings over entire speed, temperature and pressure range
  • Body retaining screws for maintaining mechanical seal contact during the inspection
  • Extended outer seal life. A wave spring, instead of an O-ring, mechanically loads the seal.

Universal Twin Screw Series - Positive Displacement Pumps

Universal Twin Screw Series pumps offer reliability, process flexibility, and smooth operation.

Benefits

  • Reliable performance – Screws made from Waukesha Alloy 88 non-galling material allow the pump to run through incidental contact and reduce risk of pump damage if screws make contact
  • Gentle product handling – Pumps large particulates without degradation
  • Responsive service – Extensive global distribution network with certified repair centers provide quick response times for parts and service
  • Easy maintenance – Front loaded access to product side seals
  • Process flexibility – Low inlet pressure requirement and a wide range of operating speeds allow for multiple duties including process and CIP supply. Bi-directional flow capability without making modifications to the pump.
  • Smooth operation – Reduces slip pulse in low inlet pressure, low viscosity, and high pressure conditions
  • Reduced noise levels – Operating principle virtually eliminates pressure fluctuations
  • EHEDG (Type EL Class I) certification applies for UTS pump sizes 015 to 220 with EPDM, FKM or FFKM gaskets and SiC, TC or C mechanical seal material

Universal 2 Series - Positive Displacement Pumps

The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility.  Clean-in-Place (CIP) capable with optional flat body profile and free draining vertical ports.  This highly robust pump can run at pressures of up to 500 psi.

Key Features & Benefits

  • CIP capability available. Pump body has optional internal flat body profile and
    will free drain with vertical ports. Optional rotor and body hub drilling provided
    for difficult CIP cleaning applications.
  • Cover is free draining in horizontal or vertical port positions.
  • Rotor/shaft connection sealed from product zone.
  • Single mechanical seals standard. Optional double mechanical seals
    also available.
  • Seal flush optional: seal areas interconnected to improve circulation
    and draining of seal flush fluid. Steam-In-Place also is optional.
  • Stainless steel bearing frame optional on models 006 to 370.
  • Aseptic design (Option)

Universal Series - Tru-Fit - Positive Displacement Pumps

Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps.  Tru-Fit pump model advantages include: No shaft alignment necessary, no coupling guard required and ease of maintenance.

Benefits:

  • No shaft alignment necessary
  • No coupling guard required
  • Available for models 006 through 320 U1, U2, UL
  • Special base design enhances cleanability
  • Reduces overall length of complete unit by an average of 20-25%
  • Average of 10-20 gear ratios available per horsepower
  • NEMA or IEC frames available, right angle reducer also available for additional space savings
  • 1/2 through 60 horsepower drive options available
  • Horizontal or vertical porting available
  • Separate oil sump for gear reducer and timing gears
  • Easy to maintain

Universal 2 Series - Rectangular Flange - Positive Displacement Pumps

Specifically designed to pump “unpumpable” products, such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps.

Six models feature inlet ports ranging in size from 7.13 to 86.87 square inches.

Benefits

  • 316 stainless steel body
  • Large, rectangular inlet port
  • Non-galling Waukesha “88” alloy rotors
  • Maximum pressure: 200 psi (13.8 bar)*
  • Temperature range:-40°F (-40°C) to 300°F (149°C)

Universal 2 Series - Bio-Pharmaceutical - Positive Displacement Pumps

Universal 2 Bio-Pharmaceutical positive displacement pumps are designed for pharmaceutical and biotech processes.

Features:

With advanced features of the Universal 2 PD pump, the Universal 2 Bio-Pharmaceutical is designed for the special requirements of pharmaceutical and biotech processes.

  • 316L stainless steel rotors standard; non-galling Waukesha “88” alloy rotors optional
  • 316L stainless steel product contact surfaces standard; 316L stainless steel or electropolish of all product contact surfaces optional
  • Stainless steel bearing frame
  • Additional option: seal flush
  • Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
  • Maximum temperature: -40°F (-40°C) to 300°F (149°C)

Universal 1 Series - Positive Displacement Pumps

The durable Waukesha Clean-out-of-Place (COP) Positive Displacement “Can-Do Pump”. Versatile in application, its reliability has made it the industry standard worldwide.

Features:

For more than half a century, Waukesha Cherry-Burrell® has been a leader in the design, manufacturing and application of external circumferential piston (ECP) style, rotary positive displacement pumps. Waukesha pumps are in service around the world and offer many key features, including:

  • 316L stainless steel body, cover, and shaft
  • Easy disassembly for COP cleaning
  • Elastomers that comply with FDA requirements
  • Aseptic models available
  • Meets 3-A sanitary standards

Universal 1 Series - Rectangular Flange - Positive Displacement Pumps

Specifically designed to pump “unpumpable” products, such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps.

Specifically designed to pump “unpumpable” products; such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps. Six models feature inlet ports ranging in size from 7.13 to 86.87 square inches.

Benefits

  • 316 stainless steel body
  • Large, rectangular inlet port
  • Non-galling Waukesha “88” alloy rotors
  • Maximum pressure: 200 psi (13.8 bar)*
  • Temperature range:-40°F (-40°C) to 300°F (149°C)

Universal 1 Series - 420/520 High Capacity - Positive Displacement Pumps

Positive Displacement Pumps designed to overcome the challenge of accurate pumping at high-volume capacities.

Every revolution of the 420 pumps more than 1 gallons (6 liters) ; the 520, more than 2 gallons (8 liters). Ideally suited for tomato, vegetable and pet food industries and for chemical/industrial applications.

FEATURES AND BENEFITS

Sanitation Features

  • Rotor/shaft connection sealed from product zone
  • Sideway mounting capability for better draining
  • 316L pump body and cover
  • Non-galling Waukesha “88” alloy rotors standard; permits running at tighter clearances and higher efficiencies; 316 stainless also available
  • Mechanical seals standard
  • Aseptic model option available

Universal 1 Series - Aseptic - Positive Displacement Pumps

Aseptic positive displacement pumps. Live steam or sterile solution is circulated to ports, cover, product seal areas, where bacteria might enter.

Feature:

Live steam or sterile solution is circulated to ports, cover and product seal areas, where bacteria might enter.

  • Uses live steam or sterile fluid
  • 316L stainless steel pump body standard
  • Mechanical seals standard
  • Easy to clean, disassemble
  • Maximum pressure: 200 psi (13.8 bar)*
  • Temperature range: -40°F (-40°C) to 300°F (149°C)

Universal Lobe Series - Positive Displacement Pumps

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard.

Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for
    additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.

MDL Series - Positive Displacement Pumps

The Medium Duty Lobe series is available in 9 different sizes. Shaft seal options include single mechanical, quenched, double flushed. Feet for vertical or horizontal mounting.

Feature:

  • Smooth flow
  • Gentle product handling
  • Dry running ability with double seal
  • Handles low and high viscosity products
  • Simple maintenance
  • Hygienic design
  • Low sound level
  • CIP capability standard
  • Free draining pump housing
  • Unique rotor attachment
  • Robust construction
  • Process flexibility
  • Single mechanical seals standard. Optional double mechanical seals also available
  • Grease lubricated bearings for positive lubrication over speed, temperature

Universal 2 Series - AP (Automotive Paint) - Positive Displacement Pumps

This positive displacement pump is manufactured specifically for paint re-circulation in the automotive industry.

A modification of the Universal 2 positive displacement pump, this pump is manufactured specifically for paint re-circulation in the automotive industry.

Features:

  • 316 stainless steel pump body and cover.
  • Exclusive, non-galling Waukesha “88” alloy rotors standard; permits running at tighter clearances and pumping a wide range of viscosities.
  • Rotor/shaft connection sealed from product zone.
  • Mechanical seals standard. Single or flushed double.
  • Up to 500 psi (34.5 bar) pressure capability.
  • Rotor nut designed for extended service without loosening.
  • No bearings in product zone.
  • Larger diameter 17-4 PH shafts in seal area for greater strength and stiffness. Helps eliminate vibration; extends seal life.

Universal 2 Series - Pulp and Paper - Positive Displacement Pumps

The Universal 2 positive displacement pump modified – specifically designed for the pulp and paper industry.

Feature:

Key advantages of the SP (starch pump) Universal 2 Paper Industry Pump in paper mill applications:

  • Pumps filled with settled slurries will start without damaging pump or seals
  • Pump with water flushed seals can run dry indefinitely
  • Low shear pump will not harm sensitive polymers or cooked starch
  • Smooth pulsation free flow
  • No internal rotor contact
  • Shaft timing less critical than lobe pump design
  • Typically requires less horsepower than Progressing Cavity
  • Bearing Isolators available

5000 Series - Industrial - Positive Displacement Pumps

High-efficiency rotary Positive Displacement pump configured for a wide variety of industrial applications.

Ideal for pumping low viscosity and non-lubricating fluids, for metering fluids, for gentle pumping of shear-sensitive fluids or for pumping high-viscosity fluids.

Benefits

  • Non-galling Waukesha “88” alloy rotors standard
  • A variety of mechanical seals and packing available
  • Steel-it Paint standard
  • Maximum pressure: 200 psi (13.8 bar)
  • Temperature range: -40°F (-40°C) to 300°F (149°C)

Centrifugal Pump

200 Series - Sanitary - Centrifugal Pumps

We take particular pride in our 200 Series centrifugal pump Line, offering the pump user the benefits of traditional quality, value and service with higher levels of performance.

Feature

  • 316L stainless steel volute, backplate, impeller and shaft
  • Five-bladed impeller with deeper eye for improved inlet characteristics
  • Modular seal design – one size fits all models
  • Wide range of seal options, including standard commercial seals
  • Strong JM-type motor with large bearings and strong shaft
  • Base mounting options available with all sizes
  • Temperature range of fluids up to 450°F (232°C)

C-Series - Centrifugal Pumps

Versatile Waukesha C-Series Centrifugal Pumps from Waukesha Cherry-Burrell find broad application throughout sanitary and industrial processes. These rugged pumps accommodate a wide range of solids and liquids under a variety of flow conditions and deliver long service with minimum downtime.